BONFIGLIOLI Vectron AEC 401 Series, Руководство по эксплуатации

Страница: 7 / 90

11/17 Operating Instructions AEC 7
This documentation describes the AEC device series mains unit / feed-back unit. The Operating Instructions
contain important information on the installation, use and specified application range of the product.
Compliance with this document contributes to avoiding risks, minimizing repair cost and downtimes and
increasing the reliability and service live of the device.
For this reason, make sure you read the Operating Instructions carefully.
IMPORTANT:
Compliance with the documentation is required to ensure safe operation of the device.
BONFIGLIOLI VECTRON MDS GmbH shall not be held liable for any damage caused by any non-
compliance with the documentation.
In case any problems occur which are not covered by the documentation sufficiently, please
contact the manufacturer.
For safe commissioning and operation of the AEC (ACTIVE Energy Control) series, the
following documentation must be complied with:
 These Operating Instructions
 Document “Quick Start Guide” which is enclosed with the delivery as a
standard.
In the following, the abbreviation “AEC” (ACTIVE Energy Control) is used both for the
“Mains Unit” and the “Feed-back Unit“. Wherever a certain description only refers to the
mains unit or the feed-back unit, the device will be mentioned accordingly.
The AEC series of devices can be identified by the corresponding rating plate. For the rating plate, refer to
chapter Rating plate.
In additions, the device series can be identified by its label on the case and the identification below the top
cover.
1.3 Warranty and liability
BONFIGLIOLI VECTRON MDS GmbH states that the contents of these Operating Instructions do not form
part of any previous or existing agreement, assurance or legal relationship. Neither are they intended to
supplement or replace such agreements, assurances or legal relationships. Any obligations of the
manufacturer shall solely be based on the relevant purchase agreement which also includes the complete
and solely valid warranty stipulations. These contractual warranty provisions are neither extended nor
limited by the specifications contained in this documentation.
The manufacturer reserves the right to correct or amend the specifications, product information and
omissions in these operating instructions without prior notice. The manufacturer assumes no responsibility
to update these Operating Instructions. The manufacturer shall not be liable for any damage, injuries or
costs which may be caused by the aforementioned reasons.
In addition, the manufacturer excludes any warranty and disclaims all liability, including, without limitation,
direct, indirect, special, punitive, incidental, exemplary or consequential damages arising out of or in
connection with one or more of the following causes:
 inappropriate use of the device,
 non-compliance with the instructions, warnings and prohibitions contained in the documentation,
 unauthorized modifications of the device,
 insufficient monitoring of parts of the machine/plant which are subject to wear,
 repair work at the machine/plant not carried out properly or in time,

catastrophes by external impact and force majeure.