LP (Liquid Propane) gas supply connection
Always confirm that the burner control knob is in the "OFF" position before
connecting the gas supply.
Do not obstruct the flow of combustion air and ventilation air to the appliance.
To Connect:
Ensure that there is no debris caught in the head of gas cylinder,
head of the regulator valve.
Insert the nipple of the valve coupling into the cylinder valve
and tighten the black coupling nut by turning it clockwise with
one hand while holding the regulator with the other hand. (See
Figure G.)
Hand tighten only.
To
Disconnect:
Always confirm that the cylinder valve is
in the "OFF" position before
disconnecting the gas supply.
Hold the regulator with the one hand and
loosen the black coupling nut by turning it
counter clockwise with the other hand.
G
IMPORTANT
Disconnect the propane cylinder from the regulator valve when the appliance is
not in use.
SELECTING A LOCATION
Always place this outdoor appliance on a hard, level
non-combustible surface such as concrete,
rock or stone.
Minimum Clearance from Unit to Combustible
Materials
72”(182.9
cm) from the top; 48” (121.9 cm)
from all sides and back. Do not
put
this
appliance under any overhead enclosure.
Position the appliance so that you have easy
access to the control knob.
9
Cover must be removed when burner is in operation.
Fire pit and propane gas cylinder minimum distance must be over 60”
(
as per the
below
photo
)
.
