STEP
4
(1)
Check each part before using the
product. Make sure the gas
supply system is turned "OFF"
before assembling.
See Figure I.
(2)
Put the gas tank in the tank
seat. Make sure the gas tank
sits on the tank seat com-
pletely. Turn the wing screw on
the outer part of tank seat
clockwise to secure the gas
tank tightly.
See Figure IV, V.
(3)
Locate the battery and remove
the plastic cover first. Unscrew
the rubber cap of the Electric
Igniter, place a AAA battery into
the battery case. Make sure the
positive pole ("+") is towards the
cap. Screw the cap back to the
battery case tightly.
See Figure II.
(4)
Open the lava rock boxes,
evenly distribute the lava rocks in
the top of the firebowl.
See Figure
III.
STEP 4
I
II
III
IV
V
WARNING:
** DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks
into the firebowl. Always keep Ignition
Screen visible. This screen must be
clear and free of obstructions at all
times to insure proper operation.
The burner of the firebowl must be
covered by lava rocks completely.
Otherwise the flame may be extin-
guished partially. See the Figure
CORRECT and INCORRECT for
reference.
CORRECT
INCORRECT
8
