Bona Scorpion DCS, Руководство по эксплуатации для владельца

Страница: 15 / 29

15
SCORPION DCS QX45 User Manual_
January 2014 Edition
Starting the machine
Sander operation
6. Keep the cable away from the pathway of the machine.
7. Turn the belt guard upwards. 8. Fit the abrasive according to the ABRASIVE
ASSEMBLY PROCEDURES (pg. 17) depending on the
type of drum installed on the machine.
9. Ensure the lever is engaged and the
drum is raised from the floor.
10. Close the abrasive safety guard.
11. Check the motor
cable is
connected to the
socket on the
extractor
head
and the
handle/motor
interconnection
cable is plugged
into the socket
on the side of
the motor box.
12. Connect the plug to the power point.
13. Switch on the extractor by
pressing the switch on the
head.
14. Release the drum lifting lever by pulling the red knob on the
opposite side of the lever sideways.
15 The motor starts by pressing
the start button.