Bona Scorpion DCS, Руководство по эксплуатации для владельца

Страница: 10 / 29

10
SCORPION DCS QX45 User Manual_
January 2014 Edition
Commencing operation
Instructions for electrical connection
HAZARD If the machine is used with a damaged plug or power supply cable death may occur
from electrocution. If cables or plugs are worn or damaged in any way, have them
replaced by the manufacturer or the K&T technical support service or similarly qualified
person, in order to prevent risks to safety.
Cables, extensions and plugs
Only use approved cables. The maximum recommended cable length is 7m; for greater lengths use cables with a
larger cross-section.
CAUTION Using the machine with unsuitable cable cross-sections and/or excessively long cables
may cause injury or damage to people or objects.
WARNING The machine must never be moved using its cable and the cable must never be pulled
when disconnecting from the socket.
WARNING Keep the cable away from sources of heat, oil and sharp edges.
CAUTION
MACHINE WITH 230V

50Hz SINGLE PHASE MOTOR
For machines with a 230-240V~50Hz single phase motor (Europe), a HO5VV-3x1.5 mm
2
HAR-approved
power supply cable must be used along with an approved SCHUKO 2P+T16A 200÷250V plug.
For non-European versions contact an authorised K&T distributor.
Instructions on removing sawdust generated during use
HAZARD
Sawdust can ignite spontaneously and cause injury or damage. It must be disposed of
appropriately.
Always empty the sawdust into metal containers which are located outside the building.
Do not reuse the bag!
HAZARD
Sawdust can ignite spontaneously and
cause injury or damage.
Replace the bag when it is 1/3 full
and/or when the machine is not to
be used again.
Never leave the dust bag unattended
when it contains sawdust.
Do not empty the contents of the dust
bag above a fire.