Bona Scorpion DCS, Руководство по эксплуатации для владельца

Страница: 14 / 29

14
SCORPION DCS QX45 User Manual_
January 2014 Edition
Machine warnings
Prohibited use
WARNING
This equipment is not to be used by anyone (children included) with physical or mental disabilities, or anyone
without the relevant experience and knowledge, unless they have received instructions on using the
equipment and are supervised by a responsible person to ensure their safety.
CAUTION This equipment is not suitable for collecting hazardous dust.
CAUTION Using the machine to move objects or moving on an incline may cause injury or
damage. The machine must only be used to sand dry wooden floors which are level or
have a maximum incline of 2%. Do not use the machine to sand furniture. Do not sit
astride the machine when it is operating.
CAUTION Work surfaces may be seriously damaged if the machine is left turning on one point
while the tool is in contact with the surface. To avoid damaging the surface approach
the cutting line carefully. Do not stop when lowering and raising the equipment, keep
moving at constant speed.
Starting the machine
Sander operation
To start the machine proceed as follows:
1. Become familiar with the
machine and read all
instructions and safety
notices. Ensure that all
operators have read this
manual.
2. Remove the extractor head and the filter from the body of the extractor.
3. Arrange the paper bag in the container as
shown below.
4. Replace the head, securing it to the trunk with the
clamping hooks.
5. Locate the power supply. The socket must be compatible with the plug. To avoid electrical hazards the
socket must be earth protected with a 20 A fuse.