9
Power
•
Use only the DC power adaptor (JEITA type4) supplied with the unit. Do not use any
other DC power adaptor.
•
If using POE to power the camera, PoE+(IEEE802.3at) is supported
•
Ensure that the POE power source has sufficient power budget to power the camera, or some features may not
function properly.
VISCA over IP Control
With VISCA over IP function, you can control the camera using VISCA protocol on a controller equipped with
IP communication capabilities via LAN. This converter converts control signal via Visca Over IP to Serial
control signal to control PTZ camera with only serial control functionality.
