20
System-System Settings-Maintenance
The Maintenance tab under the System Setting section can be used to perform the following functions:
•
Firmware Update
You can upgrade IP Encoder software and
FPGA software via this Firmware Update
feature.
o
Two types of firmware can be
upgraded from this section:
▪
Firmware for IP encoder. The
name of the file shown as
“BC9-IP-xxxxxx.dat”
▪
Firmware for FPGA. The
name of the file shown as
“BC9-FPGA-xxxxxx.dat”
o
A firmware file can be obtained from BOLIN Technology website: www.bolintechnology.com
NOTE:
o
For MCU version upgrade, please refer to “Upgrading MCU
Firmware” in User Manual Part 1.
NOTE: You need to add the camera IP interface URL to the IE browser’s Trusted
sites before to start upgrade, otherwise, you will be prompted that the file cannot be
opened.
o
Click Setting button of IE browser, access to Internet Option>
Security page;
o
There has Trusted sites option, click and add the URL to the list;
o
Please don’t check the “Require server verification (https:) for all
sites in this zone” option box;
o
Go back to maintenance page and now you can start the upgrade;
•
Device Restart
o
Soft reboot, only restart the IP
encoding board. When there is a
problem with the IP interface or
the IP output, you can try to
restart the encoding board;
o
Supports auto restart and
manual restart mode;
o
Auto Restart can be configured as Never, Per day, Per week, Per month, what you have to do is just
select an option and click Enter button to make it available.
o
Manual Restart is just to click the Manual Restart Device button, and the camera encoding board will
going to restart immediately.
