4
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must
read all of the Safety Instructions supplied with your equipment before installation and operation.
Warnings:
•
If the device does not work properly, please contact your dealer. Never attempt to disassemble the device
yourself. (We will not assume any responsibility for problems caused by unauthorized repair or
maintenance.)
•
This installation should be made by a qualified service person and should conform to all the local codes.
•
When shipping, the device should be packed in its original packaging.
•
Make sure the power supply voltage is correct before using the device.
•
Do not drop the device or subject it to physical shock.
Maintenance Precautions:
•
If there is dust on the surface, remove the dust gently using an oil-free brush or a rubber dust blowing
ball.
•
If there is grease or a dust stain on the surface, clean the surface gently using anti-static gloves or an
oil-free cloth. If the grease or the stain still cannot be removed, use anti-static gloves or an oil-free
cloth dipped with detergent and clean the surface gently until it is removed.
•
Do not use organic solvents, such as benzene or ethanol when cleaning the surface.
Regulatory Compliance
FCC Part 15
This equipment has been tested and found to comply with the limits for digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own
expense.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive
2004/108/EC.
WEEE Directive
–2002/96/EC
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment
(WEEE) Directive and must be disposed of in a responsible manner.
