11
RS232 serial control via Visca Over IP
NOTE:
•
This Visca Over IP converter does not support Daisy Chain multiple camera control.
•
This diagram shows how to make the connection correctly, for you to make the control with the controller and the
camera successfully, please refer to your controller and camera user guides.
1.
Use extension cables included RJ45 to RS422/232 Phoenix terminal contact adaptor to make RS232 connection for your
camera.
2.
You can use CAT5/6 T-568B Standard Ethernet cable direct connect between the camera and the converter to make RS232
connection by following the pin definition below:
Important:
