13
2.
You can use CAT5/6 T-568B Standard Ethernet cable direct connects between the camera and the converter to make RS422
connection by following the pin definition below:
Connection for controlling SONY serial control PTZ camera
NOTE:
•
It requires a special firmware to control SONY serial PTZ camera. Please consult your seller to gain the correct
version of the firmware.
•
This Visca Over IP converter does not support Daisy Chain multiple camera control.
•
This diagram shows how to make the connection correctly, for you to make the control with the controller and the
camera successfully, please refer to your controller and camera user guides.
1.
Use extension cables RJ45 to RS422 Phoenix connecter adaptor included to make RS422 connection for your camera.
