Bolin Technology FEX Series, Руководство пользователя

Страница: 39 / 49

39

If the device ID, protocol or server IP is changed, the camera will restart, and the login password for admin and the
system time will be updated as the settings on the central management server. In addition, all settings, except the
following, will be restored to factory defaults: network interface card, server, image, OSD, privacy mask, custom
information, and ROI.

Registration will fail if the device ID is different from that stored on the central management server. You need to
restart the camera in order for the registration to succeed.

If the camera operates independently, select None for Protocol.
Connect via the Private protocol
1. Click Setup > Common > Server , and then
click the Management Server tab.
2. In the Device ID text box, enter an ID that is
unique in the network.
3. Select Private from the Protocol drop-down
list.
4. Enter the correct IP address and port number
for the central management server.
5. Click Save .
Serial Port Mode Configuration
The RS485 serial port is used for data exchange with the third-party device. Serial port settings on the camera should
be consistent with that of the connected third-party device.
NOTE:

This function is not supported by some models, please see the actual model for details.

The actual displayed Web interface may vary with the device model.
PTZ control