Bolin Technology FEX Series, Руководство пользователя

Страница: 37 / 49

37
system.

Common user: referred to as “user” in this manual. User only has permission to play live and recorded video. Up to 31
common users are allowed in the system.
You can add a user on the user management interface (under
Setup > System > Security ).
After the user is added successfully, you can change the password by entering the new password or delete the user by
clearing the username.
NOTE:

Only admin can change passwords. Changing the username or password for a user when the user is still logged
in will force the user to log out. The user must use the new username or password to log in.

Only admin can add and delete users. Deleting a user when the user is still logged in will force the user t o log out.
A deleted user cannot log in.
Setting Secure Data Transmission
Set a secure channel for data transmission to ensure security.
1. Click Setup > Network > Port .
2. Enter the port number in the HTTPS Port text box
and then click Save .
3. Click Setup > System > Security . Under HTTPS , select
Enable . Uploading a custom SSL certificate is also
supported to ensure security.
4. Click Save .
Next time you log in, enter the address in https://IP:HTTPS port number format, for example,
https://192.168.0.13:443,
to enter secure channel mode. If HTTPS uses a default port number, enter the address in
https://IP
directly .
RTSP Authentication
RTSP (Real Time Streaming Protocol) is an application layer protocol. To transmit and control the audio and video,
set RTSP authentication on the Web interface.
1. Click Setup > System > Security > RTSP Authentication .
2. Select an authentication mode (basic/digest) and then click Save .
Hide Vendor Information
You can set to hide the vendor information of the network camera on the Web interface.
1. Click Setup > System > Security .
2. Under Registration Info , select Enable .
ARP Binding
This function can protect the camera from ARP attacks. When the
camera visits an IP of another network segment via a gateway, it
can communicate only with the MAC address binding to the
gateway address in the same segment.
1. Click Setup > System > Security > ARP Binding .
2. Select the check box to enable the ARP binding function
and set the MAC address.
3. Click Save .
IP Address Filtering