Bolin Technology FEX Series, Руководство пользователя

Страница: 20 / 49

20
FTP
After the configuration of FTP, you will be able to upload snapshots from network cameras to the specified FTP server.
1. Click Setup > Network > FTP .
2. Configure the IP address, port number of the FTP server, the username
and password of the upload account, enable
Upload Images and
Overwrite Storage , and then set the overwrite image threshold.
3. Click Save .
E-Mail
After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the specified E-mail
address.
1. Click Setup > Network > E-mail .
2. Configure relevant parameters of the sender and the recipient.
The following table describes some major parameters.
A. SSL
a.
When enabled, the e-mail will be sent through SSL
encryption.
B.
Attach Image
a. When enabled, the e-mail will contain 3 instant snapshots as
attachment according to the Capture Interval.
3. Click Save .
Port Mapping
1. Click Setup > Network > Port Mapping .
2. Enable Port Mapping and select mapping type. If Manual is
selected, then external ports must be configured (external IP is
obtained automatically by the camera). If the configured port is
occupied, then the
Status will show Inactive.
3. Click Save .