Bolin Technology FEX Series, Руководство пользователя

Страница: 33 / 49

33
2.
When an alarm is reported, the PTZ camera automatically goes to the preset to capture video
in the correct scene.
d.
Upload to FTP
i.
With Upload to FTP selected, the camera will automatically upload snapshots to the specified FTP
server when an alarm is triggered.
1.
Make sure you have completed FTP and Configuring Capture before using this function.
e.
Trigger E-mail
i.
With Trigger E-mail selected, the camera will automatically send snapshots to the specified E-mail
address when an alarm is triggered.
1.
Make sure you have completed E-Mail and Configuring Capture before using this function.
f.
Trigger Storage
i.
With Trigger Storage enabled, the camera automatically starts recording after an alarm is triggered.
1.
Make sure you have completed the post-recording time settings before using this function.
g.
Enable Plan
i.
Select the check box and set the start and end times during which motion detection alarm is effective.
You can directly drag the mouse to draw a plan and click
Edit to edit time periods in the table. The
time periods cannot overlap. The camera reports alarms during the specified period(s) only.
ii.
You can select from Monday to Sunday and set four periods for each day.
iii.
Plan drawing using a mouse is only supported by IE versions later than 8.0. After setting the plan for
one day, you can apply the same settings to other days by clicking
Copy and Paste .
iv.
Drag the mouse to draw a plan and Edit time periods in the table.
7.
Click Save .
Configuring Audio Detection Alarm
The camera can detect input audio signals for exceptions. When the rise or fall of volume exceeds the set limit, or when
the input volume reaches the threshold, the camera reports an alarm and triggers the set actions. Make sure that an audio
input device is correctly connected to the camera and audio input is turned on in
Configuring Alarm Input.
1. Click Setup > Events > Common Alarm > Audio Detection .