19
4. EXAMPLES OF USE
In order to illustrate how the GSM control works for triggering an event in a school, here are some examples
of use.
For the rest of the examples, we consider:
- The school is called “Victor Hugo”,
- 7 numbers are stored in the GSM control with the following assignments in the groups:
Contact
Telephone number
Assignment Group(s)
Police
+33611111111
G3
Town Hall
+33622222222
G4
Headmaster
+33633333333
G2 & G5
Teacher_A
+33644444444
G1
Teacher_B
+33655555555
G1
Teacher_C
+33666666666
G1
Administrator
+33677777777
G5
- a configuration of the GSM control and SIGMA to activate the following alerts:
G2:
Intrusion
(as a reminder: G2 > INCALL1 function assigned - activates relay output OUT1),
G3:
Lockdown
(as a reminder: G3 > INCALL2 function assigned - activates relay output OUT2),
G4:
Flooding
(as a reminder: G4 > INCALL3 function assigned - activates relay output OUT3).
Refer to Section
3.2.2 Contact list and Rights Management
for a complete reminder of the rights assigned for
each group.
- a config
uration of the GSM control and SIGMA to activate the following alarm feedbacks:
IN4 (alarm input):
Intrusion
IN5 (alarm input):
Lockdown
• Case of an intrusion alarm triggered by pressing an IP control Box :
If the intrusion alarm is physically triggered by pressing an IP control box in the school,
all contacts, except the
Administrator,
will receive a warning SMS alerting them of the triggering of the intrusion alarm, as the alarm input
IN4 is dedicated to the escalation of this alarm and all groups (except G5) have the ALARMSMS function assigned.
The warning SMS will be presented as follows (depending on the programming of the GSM control):
SCHOOL V.HUGO 0.48
*
----------------
ALARM:
INPUT: alarm was released
IN4(INTRUSION): high
* corresponds to the product version
• Case of a flood alert triggered remotely by an incoming call:
According to the programming described above, only the Town Hall can remotely trigger the flood alert in the school.
To do this, it must call the GSM control number from its number stored in the product (+33622222222).
However,
there is no dedicated alarm input for this alert, so there will be no warning SMS sent to anyone.
• Case of a lockdown alert triggered by an incoming call:
According to the programming described above, only the Police can trigger the remote lockdown alert in the school.
To do this, it must call the GSM control number from its number stored in the product (+33611111111).
All contacts,
except the Administrator,
will receive a warning SMS alerting them of the Lockdown Alert as the IN5 alarm input
is dedicated to this alert and all groups (except G5) have the ALARMSMS function assigned.
The warning SMS will be presented as follows (depending on the programming of the GSM control):
SCHOOL V.HUGO 0.48
*
----------------
ALARM:
INPUT: alarm was released
IN5(LOCKDOWN): high
* corresponds to the product version
EN
