18
3.3.10.5 Changing a contact’s phone number
Steps
Command to be sent by SMS
Description
A
TEST TEL33xxxxxxxxx
#
PINcode
Contact identification (name, location(s) and
assignment(s)) from its telephone number.
B
SET TELNR XX +33xxxxxxxxx
#
PINcode
Changing the phone number of a contact from its location
number
(XX
).
This step must be done twice if a number is stored
in G5 and in another group because it occupies two
different memory locations.
3.3.10.6 Deleting a contact
Steps
Command to be sent by SMS
Description
A
TEST TEL33xxxxxxxxx
#
PINcode
Contact identification (name, location(s) and
assignment(s)) from its telephone number.
B
RESET TEL XX
#
PINcode
Deleting the contact corresponding to its
location (
XX
).
This command is particularly useful for removing the
contact from one group (as it is linked to the number
location and a contact in 2 groups will have 2
different locations) without deleting it from the other
group.
Deleting a location generates a reorganisation of
positioning. If 3 numbers have been registered and
the second number is deleted, slot 3 moves back one
place to slot 2.
Other commands possible:
Command to be sent by SMS
Description
RESET TEL33xxxxxxxxx
#
PINcode
Deleting the contact corresponding to its
telephone number.
This command deletes all locations with this phone
number registered in all groups where it is present.
Deleting a location generates a reorganisation of
positioning. If 3 numbers have been registered and
the second number is deleted, slot 3 moves back one
place to slot 2.
3.3.10.7 Deleting the contact list
Step
Command to be sent by SMS
Description
A
RESET TELALL
#
PINcode
Deleting the entire contact list.
EN
