16
3.3.8. Checking the contact list
Steps
Command to be sent by SMS
Description
29
TEST TEL
#
GX
#
PINcode
Identification of saved contacts
(name and location) in each group.
(X= 1,2,3,4,5)
Replace GX successively with G1, G2,
G3, G4 and G5.
Check that
groups G1,
G2, G3 and G4
contain distinct
contact names.
3.3.9. Con
fig
uration and security check
Steps
Command to be sent by SMS
Description
30
TEST GX
#
PINcode
Checking the rights assigned for each group.
(X= 1,2,3,4,5)
Replace GX successively with G1, G2, G3, G4 and G5.
Refer to Section
3.2.2 Contact list and Rights Management
to perform the check.
31
STATUS
#
PINcode
Indication of the product status at the current time for
checking the configuration.
32
SET PIN NEWPINCODE
#
PINcode
Changing the PIN code.
For greater security, once commissioning has been completed and the system has been tested for proper
operation, we recommend changing the previously set PIN code (1513).
Sending the command by SMS (see above):
SET PIN 1234
#1513
Important: Do not lose the new SIM card PIN code. A return to factory settings does not change the SIM card
PIN code. After a return to factory settings, the default PIN code expected by the GSM control box is: 1513.
New PIN code to customise Old default PIN code
EN
