Bodet GSM CONTROL, Инструкция по установке и эксплуатации

Страница: 15 / 43

15
EN
3.3.4. Setting the OUT relays
Steps Command to be sent by SMS Description
16
SET NAMEOUT1 NEWNAME # PINcode
Setting the name of output OUT1
(max 10 characters).
Example: newname = Intrusion
17
SET INCALL1 2 # PINcode
Configuration of relay OUT1.
18
SET NAMEOUT2 NEWNAME #
PINcode
Setting the name of output OUT2
(max 10 characters).
Example: newname = Lockdown
19
SET INCALL2 2 # PINcode
Configuration of relay OUT2.
20
SET NAMEOUT3 NEWNAME # PINcode
Setting the name of output OUT3
(max 10 characters).
Example: newname = Flood
21
SET INCALL3 2 # PINcode
Configuration of relay OUT3.
3.3.5. Setting the IN alarm inputs
Steps Command to be sent by SMS Description
22
SET NAMEIN4 NEWNAME # PINcode
Setting the name of the IN4 alarm input that will appear on
the SMS when the corresponding alert is activated (max
10 characters). Example: newname = Intrusion
23
SET IN4 LH 1 # PINcode
Configuration of the IN4 input.
24
SET NAMEIN5 NEWNAME #
PINcode
Setting the name of the IN5 alarm input that will appear on
the SMS when the corresponding alert is activated (max
10 characters). Example: newname = Lockdown
25
SET IN5 LH 1 # PINcode
Configuration of the IN5 input.
3.3.6. Activation and setting of the alarm
Steps Command to be sent by SMS Description
26
ALARM ENABLE # PINcode
Activation of alarm sending.
27
SET IDLEALARM 1 # PINcode
Alarm configuration.
3.3.7. Adding contacts
The following step must be repeated for each of the contacts you wish to save in each of the groups.
Please make sure that the contact name (PERSON_NAME) is short (max 10 characters, no spaces
allowed).
Use the same contact name if the contact is registered in 2 groups (the only combination allowed is: G5 +
one other group). It should then be added once to each group.
Telephone numbers must be entered in international format.
Steps Command to be sent by SMS Description
28
SET TEL +33xxxxxxxxx GX
PERSON_NAME # PINcode
Adding a contact ( name) to the GX group.
(X= 1,2,3,4,5). Replace GX with G1, G2, G3, G4 or G5
depending on the rights you wish to assign to the
contact.
Example:
SET TEL +33xxxxxxxxx G1 LUC_ROBIN # PINcode
will add the contact "Luc Robin" to group 1.
This contact will therefore have the rights attached to group G1.