Boca FDSP34AI, Руководство по установке

Страница: 56 / 68

56
On-Line EXPRESS
Changing a Register Value
To change a register value, use the Sn command (ATSn=v), where n
is a register number and v is the new value you want to assign to
the register. Type:
AT S0=3 [ENTER]
to have the modem automatically answer on the third ring.
The following table lists the modem’s registers and their functions.
Reg. Range Units Default Definition
S0 0-255 rings 0 Auto-answer
S1 0-255 rings 0 Count incoming rings
S2 0-255 rings 43 Escape character value.
S3 0-127 ASCII 13 Carriage return character.
S4 0-127 ASCII 10 Line feed character.
S5 0-255 ASCII 8 Backspace character.
S6 2-255 seconds 2 Wait time for Blind Dialing.
S7 1-255 seconds 60 Wait for carrier after dial.
S8 0-255 seconds 2 Pause time for dial delay.
S9 1-255 seconds 6/10 Carrier detect.
S10 1-255 seconds 14 (1.4) Lost Carrier to Hang Up Delay.
S11 50-255 seconds 95/100 DTMF tone duration
(* in one-hundredth second increments)
S12 0-255 seconds 50 (1) Escape code guard time*.
(*in one-fiftieth second increments)
S14 Bit Mapped Bit mapped registers.
S16 Bit Mapped 0 Modem test options.
S18 0-255 seconds 0 Test timer.
S19 Bit Mapped Bit-Mapped registers
S21 Bit Mapped Bit mapped registers.
S22 Bit Mapped Bit mapped registers.
S23 Bit Mapped Bit mapped registers.
S25 0-255 seconds 5 Asynchronous DTR Delay.
S26 0-255 seconds 1 RTS to CTS Delay Interval.
S27 Bit Mapped Bit mapped registers.