EN/12
Retrofit / Installation kit No. 65 90 0 136 830
Installation Instructions No. 01 29 0 142 620
Issue date: 10.2001
5.
Connection overview
0
0
Item
Description
Signal
Cable colour
/ Cross-
section
Connection location in the car
Abbreviation
/ Slot
A1
Black 12-pin
socket casing
---
---
To branch C1, black 28-pin plug casing
---
A2
1-pin black plug casing, twin-
lead terminal
Terminal
30
RT
To black 2-pin plug connector in the boot
on the right
X325/1
A3
1-pin black plug casing, twin-
lead terminal
Terminal R VI
To black 2-pin plug connector in the boot
on the right
X325/2
A4
1-pin black plug casing, twin-
lead terminal
Terminal
TAA
SW/WS
Cut the branch A4, black/white cable;
connect the non-terminated wire end with
insulation-piercing connector (40) to the
black 12-pin plug connector in the boot
on the left; to branch E1 in cars after 9/99
X322/3
A5
1-pin black plug casing, twin-
lead terminal
Mute
WS/BR
Do not connect (tie back)!
---
A6
1-pin black plug casing, twin-
lead terminal
Terminal
58
GR
To black 8-pin socket casing of the left tail
light PIN3;
X319/3
A7
1-pin black plug casing, twin-
lead terminal
Terminal
RSL
WS/GE
Cut off plug casing
Extend the non-terminated wire end with
a ws/ge cable l = 500 mm, 0.5 mm
diameter (from workshop stock) using an
insulation-piercing connector (40) and
connect to the standard wiring harness at
the right C pillar
---
A8
Cable eyelet, 6 mm in diameter
Terminal
31
BR
To earth post at left tail light
X19518
A9
Black 3-pin
socket casing
Navi LF
---
To black 3-pin plug casing in A pillar on
the driver’s side, to switch module
---
A10
Black 2-pin
socket casing
---
---
Do not connect (tie back)!
---
A
A1
A4
A2
A3
A4
A5
A6
A7
A8
A9
A10
40
0
039 0325 B
