EN/23
Retrofit / Installation kit No. 65 90 0 136 830
Installation Instructions No. 01 29 0 142 620
Issue date: 10.2001
11.
To install and connect the monitor, gooseneck and remote control
0
0
0
0
For safety reasons the following work must
be carried out precisely as described.
Secure the monitor mounting bracket (19) to the
monitor (18), as shown in the figure, using a
countersunk screw M5x10 (33).
Attach the locking washer (30) to the recess in the
monitor mounting bracket (19).
Secure the rotary knob (32) to the monitor (18)
using a toothed washer (31) and Philips screw 1/4"
x 5/8" (34).
0
Insert the assembled monitor (18) into the
mounting (50) on the gooseneck (26) and secure it
with the retaining clip (51) on the gooseneck (26).
Connect the connection plug (52) on the
gooseneck (26) to the monitor (18).
0
Remove the hexagonal screws (50) in the car
(these are no longer required).
Secure the mounting plate for the gooseneck (20)
with the hexagonal screws M8x40 (22) with a
washer and spacer bushes (21).
Fit the side trim (51) again.
18
32
31
34
33
30
33
33
33
19
039 0295 B
26
52
50
51
18
039 0296 B
50
21
51
20
22
039 0297 B
