Manual 2100-583G
Page
10 of 48
MIS-3163
FRONT - AS SHIPPED LOCATION
CONTROL PANEL LOCATIONS
OPTIONAL REAR LOCATION
FIGURE 3
CHANGING WATER ENTRANCE LOCATION (FRONT TO REAR)
BY RELOCATING CONTROL PANEL
RELOCATABLE CONTROL PANEL
The control panel of the GW-Series products can be
relocated to best suit the installation. It is factory shipped
where the control panel is located on the same side of the
unit the water connections are located.
NOTE: the control
panel can be moved to the rear of the unit opposite to
where the water connections are located.
See Figure 3.
1. Remove both front and rear service panels.
2. Remove control panel cover.
3. Remove four (4) screws securing control panel to
unit base.
4. Lift and turn control panel sideways guiding it
along the right side of the compressor toward the
rear of the unit.
5. Re-secure to unit base at new location.