17
SPECIAL CLEANING INSTRUCTIONS
D
D
D
D
A
A
A
A
N
N
N
N
G
G
G
G
E
E
E
E
R
R
R
R
!
Risk of fire or explosion. Isolate filter from system before chemical cleaning; rinse filter and elements
completely before returning to service.
If filter cannot be isolated, remove media and clean at another location. Follow chemical manufacturer’s instructions for use.
Do not mix chemicals except as directed by manufacturer. Do not allow cleaning chemicals to mix with or to come in contact with
chlorine, bromine, other chemicals, or chemical feed devices.
FIGURE 5
FIGURE 6
FIGURE 4
Tank Drain
Port
NOTICE
Some pool disinfectants may clog filter media. To maximize media life and filter cycle time, closely follow
disinfectant manufacturer’s instructions when cleaning pool or filter.
For stubborn deposits, proceed as follows:
1. Follow Filter Cleaning Procedure (Page 9).
2. If deposits remain, soak element at least one hour with a solution of Filter Flush and water.
3. Wash off with water to remove oils, dirt and remaining cleaner solution.
4. If filter element does not come clean with this procedure, consult your pool professional. Acid washing should be done only by
trained professionals who have proper safety equipment and acid disposal facilities.
