![background image](http://html.mh-extra.com/html/parker/racor-ccv/racor-ccv_instruction-manual_756345001.webp)
CCV Replacement Filter
For CCV4500, CCV6000, CCV8000 and CCV12000
Closed Crankcase Ventilation Systems
Contact Information
Parker Hannifin Corporation
Racor Division
P.O. Box 3208
3400 Finch Road
Modesto, CA 95353
phone 800 344 3286
209 521 7860
fax 209 529 3278
[email protected]
www.parker.com/racor
www.parker.com/racorproducts
The Racor CCV system eliminates
crankcase emmisions and provides
a cleaner engine environment by
performing the following functions:
Reduces oil consumption by
•
separating oil from crankcase
gasses and returning oil to sump.
High-efficiency filter prevents
•
fouling of turbocharger and
aftercooler.
Filtered crankcase gas is vented
•
to engine intake system for
recombustion instead of polluting
environment.
Keeps engine compartment and
•
components clean.
Replace filter when filter change
indicator is fully extended into clear
dome while engine is idling.
Instruction Part Number 55285 Rev C
Shut down engine, allow five
1.
minutes for filter to drain before
proceeding.
Unlock release clamps, remove
2.
housing.
Remove dirty filter and O-ring from
3.
housing, dispose properly.
Inspect drain line inside housing.
4.
Ensure there are no obstructions.
Carefully clean mating surfaces.
5.
Lubricate new O-rings with clean
6.
motor oil and install onto filter and
housing.
Filter
Wear Pad/
Spacer
If applicable, verify wear pad/
7.
spacer is installed in bottom of
sump before filter placement.
Place new filter into housing on top
8.
of wear pad/spacer (if applicable).
Replace housing and lock release
9.
clamps.
Start engine and check for leaks.
10.
Correct as necessary with engine
turned off.
Head/Housing O-ring
Filter Change
Indicator
Head
Housing
CCV8000 Unit Shown
Release Clamps
Filter O-ring