background image

 

HYDRO™ ABOVE-GROUND CARTRIDGE FILTER SYSTEM 

NE635 & NE636 

 

One Year Hydro™ Cartridge Filter System  

Warranty Registration Card

 

1745 Wallace Ave, Ste. B 

St. Charles, IL 60174 

 

 
1.

 

Hydro™ Cartridge Filter System has a one year warranty against defects in materials and workmanship.  To receive the 
warranty, the card must be filled out completely and returned. 

 
2.

 

Hydro™ Cartridge Filter System must be returned with a receipt showing date of purchase, purchase price, and the 
dealer from which the cartridge was purchased. 

No warranty claim will be honored without a receipt.

 

 
3.

 

Please notify Blue Wave Products in advance of any Hydro™ warranty claim prior to shipping the item back. Contact 
our warranty claim department at 

4.

 

The freight on the Hydro™ Cartridge Filter when returned must be prepaid. 
 

5.

 

Warranty claims will only be resolved with the shipment of a replacement product, no refunds will be given. 

 
6.

 

7.

 

This warranty is in lieu of all other warranties expressed or implied and no responsibility is assumed for future damage 
due to misuse. This warranty does not cover any damage from the elements such as wind, snow, heavy rains, etc. We are 
not responsible for damage to the cartridge filter due to improper installation or excessive wear. 

Improper installation, misuse or damages resulting from acts of nature will render this warranty null and void. 
 

 

 

To send in this warranty card: Fill out below, detach and mail to the following address:  

 

BLUE WAVE PRODUCTS 

1745 Wallace Ave. Suite B 

St. Charles, IL 60174 

 
 
 

 

HYDRO™ ABOVE-GROUND CARTRIDGE FILTER SYSTEM 

WARRANTY REGISTRATION FORM 

 
Date Purchased: _____/_____/_____ 
 
Purchaser: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   
 
Address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _    
 
City/State/Zip: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   
 
Phone: (      ) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  Email: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
 
Purchased from: _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _  _ _ _ _ _ _ _ _ __ _ _ _ _ _ _    
 
Item Number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  Purchase Price: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __  

Содержание HYDRO NE635






















Отзывы: