Blue Seal G576, Инструкция по установке и эксплуатации

Страница: 12 / 26

10
Operation
Oven Pilot Ignition
This oven is fitted with a pilot as a standard option and flame failure protection, which is incorporated by
way of a thermo-electric system for the main burner. Flame failure protection will shut off the gas supply
to the burner in the event that the pilot burner goes out, so that un-burnt gas is not expelled. This is an
important safety feature which is slowly becoming law throughout the world .
1. Open the oven door.
2. Depress the oven gas control knob and rotate anti-
clockwise to the ‘PILOT’ position.
3. While holding the oven gas control knob depressed, press
the piezo ignition button to ignite the pilot burner.
Repeat Items 1 and 2 until the pilot burner is lit.
4. Release the gas control knob approximately 10-20
seconds after lighting the pilot.
5. The pilot should now remain alight - if not, repeat Steps
2 to 3 above.
6. Ensure that the pilot burner is alight by opening the pilot
viewing covers and looking through the pilot burner
viewing holes in the cast oven sole plate.
NOTE: Ensure that the pilot viewing covers are closed once the pilot is lit.
Oven - Main Burner / Thermostat
1. Ensure that the oven door is closed.
2. Turn ‘ON’ electrical power at the mains supply, the (white) power indicator light will illuminate on the
oven control panel.
3. With the pilot burner alight, depress and rotate the oven gas control knob to the 'Main Flame'
position. (This puts the gas valve in the 'Stand-By' position and control of the main burner is now
carried out through the oven thermostat control).
4. Turn the oven thermostat to the desired oven temperature setting required, this will regulate the gas
supply to the oven main burner.
5. The oven fan will start up and the oven main burner will ignite.
6. The amber heating indicator light will show that the oven main burner is ‘ON’ and the oven is
heating. When the amber heating indicator light goes out, the oven has reached the pre-selected
temperature, the burner will cycle ‘OFF’.
Oven Fan
1. The fan is operational only when the oven thermostat is set to a temperature. The fan is controlled
by a microswitch which in turn is controlled by the opening and closing of the oven door. The oven
fan is operational only with the oven door closed.
Turning the Oven to ‘Standby’ (Pilot ‘ON’ Only)
1. To turn off the oven main burner / heating, set the oven thermostat to the '0' temperature position,
this will turn the oven main burner ‘OFF’, but will leave the oven pilot burner ‘ON’.
2. In this position the pilot burner will remain alight, but the oven main burner will not operate until the
thermostat control knob is set to a temperature.
3. If oven pre-heating is required, set the thermostat control knob to temperature 190°C and allow 20
minutes before cooking in the oven to allow the oven to warm up.
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
Pilot Burner
viewing holes
Pilot Burner
Inspection Covers
Sole Plate
Fig 5