Blue Coat SG210 series, Руководство по установке

Страница: 23 / 54

Chapter 2: First-Time Configuration 23
Section C: Configuring the SG210 Using the Web Setup Wizard
Important: To configure your SG210 using a browser, the following conditions must be met:
• The browser must support Javascript and Javascript must be enabled.
• The browser must not be proxied. For information about proxied browsers, see “The
Web Setup Wizard Is Not Accessible” on page 34.
• Your SG210 must not already be configured.
To configure the SG210 using the Web Setup Wizard
1
Complete the procedure described in “Using the Serial Console to Configure Initial Settings” on page 15.
2
Connect the SG210 to a PC, or place it within your network to use the Web Setup Wizard.
3
Enter the following URL into your browser:
https://proxysg_IP:8083
where proxysg_IP is the IP address that you provided for the SG210 through the serial console.
A security warning dialog displays.
Note: For more information about this warning dialog, see
“A Security Warning Appears for the
Initial Configuration Web Page”
on page 37.
The appearance of the dialog varies depending on the browser that you use.