Blue Coat SG210 series, Руководство по установке

Страница: 44 / 54

44 Blue Coat SG210 Installation Guide
3
Power off the SG210 by removing the power supply adapter from the SG210.
Figure 5-7: Attach the ESD Strap and Remove the Cables
4
Remove the SG210 from the wall or equipment rack, if necessary.
5
Remove the cover from the SG210: loosen the two cover screws at the back of the SG210 and use them
to pull the cover toward you slightly. You might need to push the SG210 chassis away from you at the
same time. Lift the cover up and off.
Figure 5-8: Remove the Rack-Mounting Brackets and the Cover
Important: The appliance will not remain grounded if you take off the wrist strap after you
have removed the power supply adapter. To reground the appliance, connect the
power supply adapter (powering on the appliance), then reattach the wrist strap
before removing the power supply adapter.
1 Attach the ESD
strap to the
SG210 chassis
2 Remove the
Ethernet cables
3 Remove the
power supply
adapter
Loosen the cover screws and use them to remove the cover