Blue Coat SG210 series, Руководство по установке

Страница: 41 / 54

Chapter 4: Next Steps 41
Chapter 4: Next Steps
After you have completed the first-time configuration of the SG210 and have logged in, you must perform
the following actions:
• Upgrade the SG210 software by downloading the latest patch release (available at
http://download.bluecoat.com ).
• Fully configure the appliance. To fully configure the appliance, refer to the Blue Coat ProxySG Command
Line Reference , for a list of all CLI commands. For information about configuring and administering the
SG210 (including information about setting policies that will explicitly grant or deny proxied
transactions), refer to the
Blue Coat ProxySG Configuration and Management Guide Suite (the CMG). You
will need to download the CMG from the Blue Coat Web site at www.bluecoat.com . (Look for
WebPower Login under Support.) This site also has the latest support bulletins and technical notes.
If you log in to the SG210 using an Internet browser (see Section E: “Logging in to the SG210 on page
30), you can access the Blue Coat ProxySG Configuration and Management Guide Suite by clicking the
Help
button on any screen in the Management Console, which is the SG210 user interface.
• Archive your system configuration and store it in a remote location so that you can restore it, if
needed.
• (Optional) Purchase the SG210 upgrade kits. Blue Coat offers model or edition upgrades within each
SG series appliance, contact your Blue Coat sales representative for more information.
• Activate the SG210 license. You must have a Blue Coat WebPower account.
Note: If you have new SG210 hardware that previously has been registered, the license is already
associated with the hardware. Go to
Maintenance > Licensing > Install
and click
Retrieve
to obtain the
license.
If you have older hardware that previously has been registered or if the SG210 does not have
Internet access, you can install the software license
under
Maintenance > Licensing > Install
.
To activate the SG210 license:
1. Open a Web browser.
2. Disable the browser’s pop-up blocker.
3. Enter the IP address you assigned to this appliance during initial setup:
https://proxysg_ip:8082
4. Enter the access credentials, as specified during initial setup.
5. Click
Management Console.
The license warning/registration screen displays.
6. Enter your WebPower credentials and click
Register Now
; this automatically registers the hardware
and software.
7. From the Management Console, go to the License page to begin the license retrieval process:
Maintenance > Licensing > Install.
8. Click
Retrieve
. The Request License Key dialog displays.
9. Enter your WebPower credentials and click
Send Request
.
10.To verify license installation, click the
View
tab and click
Refresh Data
.
If you require detailed procedures regarding registration, license retrieval, and installation, refer to the
Licensing chapter in the SG Appliance Volume 1: Getting Started document, or click the Help button to
view the contents of that chapter in HTML format.