Blue Coat SG210 series, Руководство по установке

Страница: 11 / 54

Chapter 1: The SG210 Series Appliance 11
3
Plug the other end of the power cable into a power outlet.
The SG210 powers on and the operating system boots up. While the SG210 is booting up
(approximately one minute), the Power LED on the front panel (the left-most LED) glows solid amber.
4
After the SG210 boots up, verify that the Power LED behaves as described below:
If the Power LED is solid green after booting up, an initial configuration has already been performed.
If you did not perform an initial configuration, restore the appliance to its factory defaults to restart
the initial configuration (see
“Resetting the SG210 to Its Factory Defaults” on page 38).
Important: The use of a wall-socket adapter is not recommended, Blue Coat recommends
getting a localized power cable for your appliance. Country-specific power cables
are required to maintain product safety compliance and the warranty.
Configuration Status Power LED Activity
Not completed Flashing green and amber
Completed Solid green
Power LED