31
AQT8-QAM/IP
User Manual
Control Port IP Address:
See of Section 6.11 for details.
Control Port Subnet Mask:
See of Section 6.11 for details.
Control Port Default Gateway:
See of Section 6.11 for details.
EAS Port IP Address:
See
of section 6.11 for details
EAS Port Subnet Mask:
See
of section 6.11 for details
EAS Port default gateway:
See
of section 6.11 for details
Gige Port IP Address:
See of Section 6.11 for details.
Event Log Destination:
See of Section 6.11 for details.
Log Destination Port #:
See of Section 6.11 for details.
6.10 "Network" Screen (continued)
10
11
11
12
12
13
13
14
14
15
15
16
16
17
20
18
21
19
Remember
to
click
on
the
SAVE
button
to
apply
the
new
values/configurations.
6.11 "Admin" Screen
To change/modify the IP network parameters, as well as the Username and Password values for the unit, you must be
logged in to the unit as “Admin” to access the Admin screen (Figure 6.11, next page).
Login:
is the Administrator’s login (10 characters maximum). This login allows the user to make changes to any area
of the unit. Login is case sensitive. (Factory Default: “Admin”)
Current Password:
is the Administrator’s Current Password (10 characters maximum). Password is case sensitive and
will not be displayed. (Factory Default: “pass”)
New Password:
used only if the user wants to change the current Administrator’s password. Must enter a new
password (10 characters maximum). Password is case sensitive and will not be displayed.
Confirm New Password:
must enter the same password as entered in above. If password entered in &
does not match, an error will be displayed.
Guest Login:
is the Guest login (10 characters maximum). This login allows the user to view the unit settings but does
not allow any changes. Login is case sensitive. (Factory Default: “Guest”)
Current Guest Password:
is the Current Guest Password (10 characters maximum). Password is case sensitive and will
not be displayed. (Factory Default: “pass”)
New Guest Password:
used only if the user wants to change the current Guest password. Must enter a new password
(10 characters maximum). Password is case sensitive and will not be displayed.
Confirm Guest Password:
must enter the same password as entered in above. If password entered in &
does not match, an error will be displayed.
System Watchdog:
automatically resets unit’s Operating System if or when it is required. Options are Enabled and
Disabled.
1
2
3
4
5
6
7
8
9
3
7
3
7
4
8
Содержание AQT8-IP
Страница 40: ...40 AQT8 QAM IP User Manual Notes ...
Страница 41: ...41 AQT8 QAM IP User Manual Notes ...
Страница 42: ...42 AQT8 QAM IP User Manual Notes ...
