manualshive.com logo in svg

Blonder tongue AQT8-IP, Руководство пользователя

Поделиться
Скачать
Blonder tongue AQT8-IP Скачать руководство пользователя страница 34

34 AQT8-QAM/IP 

User Manual

6.12 "Time" Screen

The “Time” screen (Figure 6.12) is a “read and write” screen where the following parameters are displayed or can be 

configured:

Figure 6.12 - "Time" Screen

The “Time” screen allows the user to set the current date and time for the unit. To remain compliant with ATSC and 

cable standards, it is important to have the accurate date and time stamps. For this reason, it is recommended to use the 

"Automatic" option which allows the unit to automatically acquire time settings from a "Time Server" - the user must 

enter the IP address of the time server (see Section 6.11 for details).

The time server specified must support the Network Time Protocol (NTP) in order for automatic time acquisition to 

work properly. The unit would refresh the date and time settings from the Time server every 20 minutes. If, however, an 

internet connection is not available, the date and time can be entered manually. The unit is capable of adjusting the Day 

Light Saving (DST) time settings automatically, provided the “Automatically Adjust for Daylight Savings Time” in Figure 

6.12 is selected “Yes”.

Remember

 

to

 

click

 

on

 

the

 

SAVE

 

button

 

to

 

apply

 

the

 

new

 

values/configurations.

Содержание AQT8-IP













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды