Blichmann Engineering, LLC 2015
For replacement parts visit blichmannengineering.com/genuine-replacement-parts
12
ALWAYS
OPERATE OUTSIDE ONLY, AT LEAST 30FT FROM OTHER
STRUCTURES
ALWAYS
USE ONLY ON LEVEL AND STABLE CONCRETE, BRICK OR SIMILAR
HARD NON-FLAMMABLE SURFACES
.
ALWAYS
Keep
the gas supply hose away from heated surfaces AT ALL TIMES
ALWAYS
Check that all fasteners are properly tightened prior to each use
ALWAYS
Ensure that the base of the mast (aluminum post) is resting on the hard
surface
ALWAYS
Level the stand using the leveling feet and a bubble level prior to each use
ALWAYS
Check for gas leaks before each use using soapy water
ALWAYS
Wear protective gloves, clothing, and boots to prevent burns and scalds
ALWAYS
Have a fire extinguisher nearby at all times
ALWAYS
Use a pump or gravity to move hot liquids from or into a pot or cooler
ALWAYS
Use only Blichmann Engineering burners, shelves, and accessories on this
stand
ALWAYS
Let equipment cool completely after use before moving
Tier Location
While the burner and shelf tiers can physically be located on any of the 4 faces of the mast and at any height
it
is imperative to keep the center of gravity as low as possible for safe stable operation
. It is also
imperative to have
the weight of the pots as evenly balanced on all sides of the stand
as possible. DO
NOT place all tiers on one side or quadrant of the stand!
Burner Operation
Always use a long match or igniter to light the burners. Never light the burner at the venturi. Two
ignition/flame inspection holes (Fig 29) have been provided for this purpose. Prior to igniting the burners, turn
the needle valve fully clockwise to the OFF position and turn the air damper so that it is open about half way as
shown in Fig 30. A variable pressure regulator (0-10 PSI) has been provided with the stand
– ref Fig 31.
Yes!
Yes!
Yes!
NO!
NO!
