Blichmann Engineering, LLC 2015
For replacement parts visit blichmannengineering.com/genuine-replacement-parts
2
The TopTier
tm
Modular Brewing stand ships disassembled to allow it to be shipped more economically and
conveniently
via ground carriers. A list of components follows, and also a list of basic tools you’ll need to
complete the assembly.
NOTE: since the stand is modular, the burner and shelf tiers can be placed in a multitude of configurations and
infinite locations on the stand. Therefore, the gas manifold piping is NOT included and must be installed and
purchased locally by the user.
However, we do include most of the fittings you’ll need.
Parts List:
The following items are shipped with each stand.
Box 1
6ft aluminum mast
Box 2
4 - black legs
6 - stainless steel arms (3 LH, 3 RH)
1 - Gas regulator
Bag 1:
2 - wheels
2 - wheel brackets
2 - axle bolts
2 -
3/8” nuts and lock washers
4 -
5/16 X ½” long bolt and nuts
Bag 2:
14 - T-slot plates (bars with 3 threaded holes)
Bag 3:
42 - 5/16 X 1/2
” long bolts and washers
2 - P-clips (used to affix your gas piping to the mast)
2 - 5/16 X 1-
3/4” bolt with 2 hex nuts, 3 washers, 1 square nut installed
4 - Leveling feet
1
– ½” NPT pipe plug
1
– 3/8 flare X 1/2 NPT brass adapter
Burner Tier (per burner ordered)
1 - Burner
2 - Burner torsion brackets (1 LH, 1 RH)
1 - Brass needle valve
1 - Stainless gas flex hose (bellow type)
1
– P-clip assembly with bolts/nuts/washers
1
– ½” NPT pipe T
1
– 3/8 flare X 1/2 NPT brass adapter
4 -Stainless pot retaining bars
8 - 6mm bolts & nuts
7
– 1/4” X 1/2 bolts/nuts/washers
1 - Stainless air damper
1 - Spring
1 - Brass gas orifice fitting
