BLH NOBEL G5 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

BLH NOBEL G5 Скачать руководство пользователя страница 4

Technical Manual

PRECAUTIONS

READ this manual BEFORE operating or servicing this instrument. FOLLOW these
instructions carefully. SAVE this manual for future reference.

INTENDED USE

The G5 Instrument family are measuring and control devices intended for industrial
systems. Its basic function is to convert the signals from transducers to useful
information. Transducer excitation is included as well as parameter controlled signal
processing, indication of output levels, error supervision and operation of optional
external equipment. The instrument supports several types of communication
interfaces.

INSTRUMENT INSULATION AND GROUNDING

The cable connector for mains power supply should include protective grounding for
safety. The cable for 24VDC power supply (screw terminal connector) should include a
ground connected to terminal GND.

The input groups of the instrument are insulated from each other by functional
insulation. The mains connection of AC-powered instruments has reinforced insulation
according to IEC 61010. Terminals intended for connection of cable shields are
connected to the protective ground of the mains or GND terminal of 24VDC input but
must not be considered as protective grounding. Shield connection of load cell input is
not connected to mains protective ground or 24VDC GND terminal.

Change description

Revision 0: First release of this document.

!

WARNING

Only permit qualified personnel to install and service this instrument.
Exercise care when making checks, tests and adjustments that must be
made with power on. Failing to observe these precautions can result in
bodily harm.

DO NOT allow untrained personnel to operate, clean, inspect, maintain,
service, or tamper with this instrument.

«
...
2
3
4
5
6
...
»

Содержание G5

































Отзывы:

Нет отзывов