manualshive.com logo in svg

Blease Sirius 1000, Руководство пользователя

Поделиться
Скачать
Blease Sirius 1000 Скачать руководство пользователя страница 24

23 

First Line and Planned Maintenance Manual  

Frontline Sirius® 

 

1.1.5       AGSS 

The AGSS is integrated with the Frontline Sirius 3000 but external on the Frontline Sirius 2000 
and 1000.  An external flap marked AGSS is provided on the Frontline Sirius 3000 for 
connection of other breathing circuits.

 

1.1.6       Suction 

The suction controller is integrated into the Frontline Sirius 3000 and can be fitted externally to 
the Frontline Sirius 2000 and 1000.  On the 3000 the filter is beneath the work surface and 
provision for the receiver jar is below the work surface.  The controller has an OFF position, a 
max position and an adjustable setting.

 

1.1.7       Absorber 

The absorber is integrated on the Frontline Sirius 3000 and attached to the side of the 2000.  It 
can be rail mounted with the 1000. 

 

1.1.8       Ventilator 

Either the 8700 ventilator or 6700 ventilator fitted to the 3000, these have CMV, PCV and SIMV. 
Comliance Compensation and Fresh Gas Compensation. The 8700 has spirometry loops. 

1.  Technical Description 

Содержание Sirius 1000












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды