21
the language of the voice-prompt-
ed turn-by-turn directions of the
navigation system.
Note:
To change the language, the navi-
gation CD must be in the drive.
To change the language:
In the "
System
" menu, select and
confirm the "
Language
" menu
item.
The language menu appears.
In the language menu, select and
confi rm the desired language.
The language is changed.
Note:
The voice output of the naviga-
tion system is dependent upon
the data on the navigation CD.
It is, therefore, possible that
the display texts appear in the
selected language, but the turn-
by-turn directions are spoken in
English.
Activating/deactivating the code
query
To protect against theft, the device
features a code query, which is acti-
vated/deactivated as follows:
In the "
System
" menu, select and
confi rm the "
Code
" menu item.
The code menu appears.
•
➜
➜
➜
CAUTION!
Danger of theft!
If you deactivate the code query, a
thief can put the stolen device into
operation.
You should avoid deactivating the
code query!
Select and confi rm the desired
menu item in the code menu and
enter the four-digit code number
(see p. 9).
On
: After every disconnect
from battery power, the code
must be re-entered.
Off
: After a disconnect from
battery power, the code does
not have to be re-entered.
Setting the clock
The local time is set in the "
Clock
"
menu.
Note:
The clock is automatically set us-
ing the GPS satellite signals. You
only have to the clock after instal-
lation and when changing to and
from daylight savings time.
➜
➜
•
•
Language
DEUTSCH
ENGL. IMP
ENGL. MET
ESPANOL
Language
DEUTSCH
ENGL. IMP
ENGL. MET
ESPANOL
Code
On
Off
Code
On
Off
Basic settings before the trip
ROME56E_eng.indd 21
ROME56E_eng.indd 21
23.08.2006 15:04:57 Uhr
23.08.2006 15:04:57 Uhr
