2: FINAL FABRICATION (Cont’d)
DRAW
BOX
This function allows the user to print out the enclosure layout plans.
These plans can be drawn to the screen of the computer, or, print to the
paper printer.
or to Printer”
SPECIAL NOTE: ONLY BOX IS DRAWN ON THE “Draw to screen
the time.
ROUTINE, regardless of the box chosen within Screen 2 at
First highlight the DRAW BOX area, hit ENTER, and a small window will open
asking you “Draw to the screen or printer”.
Using the cursor up/down
keys, choose your destination, and press ENTER.
A drawing of the box will
then appear on the screen or will be sent to the printer.
Remember, you
must have chosen a printer in the setup screen (Screen 5) before you can
print.
BLAUBOX .
Otherwise the program may crash and you will have to restart
Regarding printing to paper, patience is in order for the Laserprinter
owner.
As with any graphics intensive program talking to a Laserprinter,
it can take considerable time to finish all copies.
We recommend that you
make preliminary prints in the 75 DPI setup in order to obtain prints in
about 2 minutes per page.
About 4 minutes per page is required for 150
DPI, and about 10 minutes per page for 300 Dpi (the printouts here look
like they are typeset!).
Prints to dot-matrix printers take about 2
minutes per page but they never looks as good as the laser stuff.
Once the print is made to paper, you will notice that several cuts may be
made on the wedge shaped box.
Stepping down the page, progressive cuts
are made so singular saw blade changes have to be made and the wood is cut
progressively smaller.
Customer: Billy Bob
f =
11
24”
:
13
Содержание Blaubox
Страница 1: ......
