Blastrac BMS-220 ADB, Руководство по эксплуатации

Страница: 23 / 40

23
7.2 Charging profile
After connecting charger with battery, connect charger with AC outlet using AC cable. The charger will go into
charging mode.
In order to find out the preselected charging profile, disconnect the charger with the battery set. Reconnect
the charger to AC o utlet, the LED’s will show the number of the chosen charging profile.
LED ’s will be showing Battery Charging Profile as below:
LED 1
(30+)
LED 2
(20+)
LED 3
(10+)
LED 4
( )
30 (something) 20 (something) 10 (something) # of blinking = (something)
If the charging profile is #35, what would happen is: LED1 will be ON to represent the charging profile is 30,
and LED 4 will blink 5 times, while LED2 and LED3 will remain off. This means 30 plus 5, showing the charging
profile is #35.
Another example is if charging profile is #18, what would happen is LED3 will be ON to represent charging
profile is 10 plus LED4 will blink 8 times to represent 8, which means #18.
The USB port is a service port to be used only for programming the charging
parameters and downloading of historical data and graphs.
Charger Specifications
AC Input
Voltage-Range(V) 100-240V
Frequency(Hz) 50-60Hz
Current-max(A) 16A
Operating Temperature -40
℃
~ +65
℃
DC Output
Voltage-max(V) 68V
Current-max(A) 60A
The charger can be used on 110V and 230V. Only the AC powercord has to be changed for 110V or 230V.
You don’t have to change any settings in the charger.
E14536_230V_EU 230V EU powercable
E14536_110V_UK 110V UK powercable
E14536_110V_US 110V US powercable
7.3 Maintenance instructions
1. Use pressurized air to blow the charger clean from accumulated dust.
2. The enclosure of the charger has been tested successfully to IEC 60529, meeting IP66.
3. Do not expose charger to oil, dirt, mud or direct heavy water spray.
4. If the detachable input power supply cord set is damaged, replace with a cord that is a safety approved
detachable cord, 3 conductor, 1.5 mm² minimum, and rated appropriate for use in the country of destination
and, on the other end, an output grounding type IEC 60320 C14 plug.
Never open the charger without permission from a Blastrac technician. Opening the charger without permission
will void the warranty.
USB-port