Blastrac BMS-220 ADB, Руководство по эксплуатации

Страница: 14 / 40

14
Seat belt usage is necessary to:
• Reduce the possibility of being thrown from the machine.
• Reduce the possibility of injuries to the body during an accident or collision.
• Hold the driver in a position which allows better control of the machine.
 The operator should always wear the seat belt no matter how short the trip in order to minimize the
risk of severe injury in the event of a crash or an emergency stop. In an accident, an un-belted
operator becomes a projectile, and can cause serious injury to himself.
 The belt must always be flat against your body and not twisted in any way. Nothing, such as an arm
rest, a phone, or any external objects should be between you and the seat belt. Improper wearing of a
seat belt will reduce the protection in an accident or collision.
 Seat belts should be adjusted as tightly as possible, consistent with comfort to properly secure the
wearer in the seat.
 Do not use any accessories on the seat belt or modify in any way the seat belt system.
 An accident or emergency stop, can damage your seat belt system, even if the accident is “minor”.
Please inspect the seat belt system after an accident.
 Never use a damaged seat belt system. A damaged seat belt will not provide protection in an accident,
resulting in serious injury.
 Seat belt systems can be prone to abuse. They are not indestructible. They must be handled with care
to avoid damage.
 Keep the belts clean and dry. Belt retraction may become difficult if the belts and webbing are soiled.
If they need cleaning, use a mild soap solution or lukewarm water. Never use bleach, dye, or abrasive
cleaners. These chemicals will severely weaken the belts.
 Never wear twisted seat belts. Excessive forces will be transferred from the belt to the wearer, in a
collision, resulting in serious personal injury.
 At least once each month, inspect the seat belt webbing for any cuts, tears, or other signs of wear
(such as fraying along the edges). Also inspect the anchor, retractor, and buckle to be sure they are
tight and operational.
5. Operation
During operating the BMS-220 ADB, the following additional safety instructions must be followed closely.
Before switching on the machine make sure that no-one can be endangered when the machine starts up.
4 Seat including presence switch
and seatbelt.
3 Red mushroom-shaped
emergency shutdown push
button.
2 Battery power meter and hour-
counter.
1 Contact switch.