Blastrac BMS-220 ADB, Руководство по эксплуатации

Страница: 13 / 40

13
4. Initial operation
Before using the machine it is essential to inspect the machine every day.
It is not permitted to use the machine if the machine safety is not according the checkpoints below.
4.1 Checkpoints of electrical safety:

Check if the power supply cable of the charger is unplugged and the cable is stored into the machine.

Any damage to electric cables is not permitted.
4.2 Checkpoints of machine safety:
Check if:

Control levers should be in neutral position.

All hydraulic hose connections are tightened and there is no leakage of oil.

The safety functions and operating functions work correct.

There are not any loose nuts or bolts.
4.3 Seat adjustment and proper seatbelt use:
Adjust the seat as needed and sit up straight and well back in the seat.
To fasten your seat belt, pull the webbing (1) out of the retractor and
insert the metal tongue into the buckle (3). There will be an audible
“click” when the ta b locks into the buckle. Pull on the strap (4) to
tighten the lap belt across your hips. The lap belt should be worn
snugly and as low as possible over the hips, do not wear it over your
belly.
To release the belt, press the buckle release button (2) and allow the
belt to retract. If the belt does not retract smoothly, pull it out and
check for kinks or twists. Then make sure it remains untwisted as it
retracts.
Periodically check the seat belt to be sure it remains snug and in
position. If there is a sudden stop or impact, the belt will lock into
position. It will also lock (restrict) if you try to lean forward too quickly.
Handle of the weight adjustment.
Knob of the backrest adjustment.
Handle of the forward/backward adjustment.