Blastrac BMC-335 ELITE RC, Руководство по эксплуатации

Страница: 12 / 39

12
www.blastrac.eu
4.4 Work area

Check the surface to be treated for loose parts (stones, screws, etc.) The surface must be swept if
necessary. Make sure the machine can travel over all inequalities on the surface. Small inequalities like
weld seams or floor joints are no barriers for the machine.

Secure the work area around the machine providing an adequate safety distance from the machine.
Use a red and white safety chain and danger sign to enclose the work area.

Remove reinforcing steel or other objects protruding from the surface in order to prevent damage to
the machine.
Use a sclerometer to determine the hardness of the floor to be treated.
Hardness chart for BMC-335ELITE: