Blastrac BMC-335 ELITE RC, Руководство по эксплуатации

Страница: 17 / 39

www.blastrac.eu
17

Assemble the spacer rings and diamond blades one by one over the axle until the end of the drum.

Clamp all diamond blades and spacer rings together by turning 2 lock nuts at the end of the tap ends .
Make sure that there are at least 2 spacer rings at the end of the drum.

Mount the side plate. A side plate which is incorrectly mounted or mounted
with force will shorten the lifetime of the drum bearings.

Always check the belt tension after mounting a drum

Never use the machine without a side plate or with an incorrect mounted side plate!
BMC-335
Width of
sawing
[mm]
Qty. of
blades
Qty. of
Spacer ring
2.5mm
340 80 85
300 71 92
250 59 100
200 47 108
150 35 116
100 24 125
50 12 133
For a finer sawing result:
Replace the normal standard Spacer ring 2.5mm (E06079) by Spacer ring 1.0mm (E07497).
For a coarser sawing result:
Replace the normal standard Spacer rings 2.5mm (E06079) by Spacer ring 3.0mm (E07549).
! IMPORTANT NOTES !
- There has to be at least one spacer ring between every diamond blade.
- The hexagon axle will hang loose when the side plate is off. This is normal.
- 80 sawing blades is always the maximum allowed amount of blades on the drum.