47
CHAPTER 4: Operation
4.6.6.B Adding Users
To add a user to the Management Card’s database, take these steps:
1. At the User List, press [Ctrl] along with “A”.
2. You will be prompted to enter a name up to fourteen displayable characters
long for the user. (The names “admin”, “administrator”, and “root” are
reserved and may not be assigned to non-admin users.) Type in the name and
press [Enter].
3. You’ll then be prompted to enter a password up to eight displayable
characters long for that user. Type in the password and press [Enter] to save
the new user account with the selected password. You’ll be returned to the
User List.
If you’re not using password security, or if this user just doesn’t need a
password, press [Enter] at the prompt without typing in anything else. You’ll
be asked whether you really want to disable the password. Press “Y” followed
by [Enter] to save the new user account without a password and return to the
User List, or press “N” followed by [Enter] to cancel the change and return to
the user list. Any new account will be displayed in the User List right away.
Add a User
Enter user name: Kelly
Enter user password:
