39
CHAPTER 4: Operation
4.6 Using the Administrator Menu
Select the Administrator Menu by pressing “A” at the User Option Menu. The
Administrator Menu will appear on your monitor. To exit this menu and return to
the User Option Menu, press “X”. The menu’s available functions are described in
the rest of this section.
Administrator Menu
Revision: A-00 Address: 1-F
--------------------------
D Delete database
I Idle timeout
(Not implemented.)
N Network options
P Change admin Password
S Session priority
U User list
X eXit admin options
--------------------------
Enter Selection:
4.6.1 D
ELETING A
D
ATABASE
It might sometimes be necessary—especially when you’re moving a Management
Card from one ServSwitch Multi system to another—to completely erase either or
both of the two databases that the Card maintains: the security logs and the
channel and user lists. To do so, take these steps:
1. At the Administrator Menu, press “D” to bring up the Delete Database Menu.
Delete Database Menu
--------------------------
1. Security Logs
2. Channel List and User List
--------------------------
Enter selection or X to exit:
2. Press “1” to delete the Card’s security logs, “2” to delete the channel and user
lists, or “X” or [Esc] to abort the deletion and return to the Administrator Menu.
3. You will be asked to confirm the deletion. Press “Y” followed by [Enter] to
proceed with it, or “N” followed by [Enter] to cancel it and return to the
Delete Database Menu. If you confirm the deletion, the Card will perform it
and then reset itself. This will take at least 45 seconds; if you’re accessing the
Card through a telnet connection, it might take twice that long until the Card
reinitializes its network presence.
