Black Box SERVSWITCH ACU1006DRA, Руководство пользователя

Страница: 105 / 116

104
RACKMOUNT SERVSWITCH™ BRAND CAT5 KVM EXTENDER LOCAL HUBS
Appendix B: Rackmounting Remotes
If you’d like to mount any of your Rackmount ServSwitch™ Brand CAT5 KVM
Extender system’s Remote Hubs in a 19" rack, use the two included brackets. If you’d
like to mount any of your full-size (non-Micro) Remote Units in a 19" rack, use the
two-bracket Rackmount Kit shown in Figure B-1 (product code RMK19U-R2). The
Micro Remote Units (ACUREM and ACUMREM) aren’t rackmountable.
Figure B-1. The RMK19U-R2 Rackmount Kit.
To use the included brackets to mount a Remote Hub, or to use the Kit brackets to
mount a Remote Unit, take these steps, referring to Figure B-2 on the next page:
1. Unscrew and keep the two screws on each side of the Remote’s case.
2A. Remote Hubs: Match up the two holes in the “Hub end” of each bracket with
the two now-vacant screwholes on each side of the Hub, then fasten the
brackets to the unit with the screws you removed in step 1.
2B. Remote Units: Match up two of the holes in the “Unit end” of each bracket with
the two now-vacant screwholes on each side of the Remote Unit. For
ACUVREM units, use the bracket’s lower pair of holes (one front and one
rear); for all other models, use the upper pair. Fasten the brackets to the unit
with the screws you removed in step 1.
3. Once you’ve attached both brackets, match the holes in the “rack end” of
each bracket to an appropriate set of matching holes on your equipment
rack. Screw the Remote assembly to the rack using your own screws, bolts, or
cage nuts (not included).