ServSwitch 4site - Installation and Operation Manual
INTRODUCTION
Operation:
Use either the buttons on the front panel, keyboard commands (hotkeys) or the mouse (hotmouse function) to
switch to another channel or select the display mode.
ServSwitch 4site con
fi
guration is effected via an On Screen Display (OSD). Use either the buttons on the front
panel or keyboard commands to activate the OSD.
The LEDs on the front panel indicate the unit’s current status.
Use the serial (RS232) port for
fi
rmware updates.
VGA / DVI
:
ServSwitch 4site supports resolutions of up to 1600 x 1200 @ 60 Hz for VGA and up to 1920 x 1200 @ 60 Hz
for DVI.
Keyboard/mouse
:
Use either PS/2 or USB ports on the computer to connect keyboard and mouse.
On the console, there are USB ports for mouse and keyboard connection.
Casing:
desktop or 19“, grey (RAL 7035) or black (RAL 9005)
Dimensions WxDxH:
43.6 x 23.4 x 4.4 cm
Weight:
2.9 kg
Operating controls:
Front panel: Four channel selection buttons, one Quad mode button, one
PiP mode button
Rear panel: One Power On/Off switch, one Reset button
Indicators:
Four active channel indicator LEDs, one Quad mode LED, one PiP mode LED
Computer ports:
4 x DVI-I (analog and digital), 4 x PS/2, 4 x USB
Console ports:
1 x DVI-I, 2 x USB for keyboard and mouse
Maximum distance:
DVI up to
fi
ve meters
Input and
output resolution:
up to 1600 x 1200 @ 60 (VGA)
up to 1920 x 1200 @ 60 (DVI) (reduced blanking also supported)
EDID adjustments:
EDID at each input port customizable
Supported
keyboard layouts:
German, English, French, Italian, Spanish
Power supply:
Internal AC adapter, 100 to 240V 50/60 Hz
Power consumption:
40 watts
Operating temperature:
5 to 45°C
Storage temperature:
-10 to 60 °C
Rel. humidity:
5 to 65% non-condensing
FEATURES
2
TECHNICAL SPECIFICATIONS
