ServSwitch 4site - Installation and Operation Manual
ON SCREEN DISPLAY
HOTMOUSE FUNCTION
Use the arrow keys to navigate in the SYSTEM menu to the entry HOTMOUSE and press ENTER/SELECT to
open the HOTMOUSE window.
To activate Hotmouse operation, navigate to “Enable Hotmouse” and change the setting to “Yes”.
There are two modes of Hotmouse operation:
Hotmouse Cursor
and
Hotmouse Menu
.
While
Hotmouse Cursor
supports only a limited set of operations,
Hotmouse Menu
allows execution of all
switch operations and PiP settings.
While the Hotmouse function is activated, the active computer can still be operated by keyboard.
ACTIVATING HOTMOUSE CURSOR
If Hotmouse is enabled (Enable Hotmouse = Yes) move the mouse rapidly four times in alternating horizontal
direction to activate the
Hotmouse Cursor
.
▬▬►
◄▬▬
▬▬►
◄▬▬
or
◄▬▬
▬▬►
◄▬▬
▬▬►
The Hotmouse Cursor changes its look depending on its position on the screen (arrows in vertical or horizontal
direction, and number of channel).
Use the Hotmouse Cursor to perform the following functions:
in Fullscreen mode:
- Switch to another fullscreen channel
in Quad mode:
- Select another active channel (keyboard, mouse)
in PiP mode:
- Modify position and size of PiP images
-
Change
active
channel
OSD - SYSTEM - HOTMOUSE
18