ServSwitch 4site - Installation and Operation Manual
KEYBOARD COMMANDS
Other Commands
+
Open OSD
Simultaneously press hotkey and ‘O’ to exit command mode and open the OSD menu (see chapter “On Screen
Display”).
+
Basic output resolution
Simultaneously press hotkey and ‘V’ for longer than 5 seconds to cycle through the following four output video
resolutions: VGA 640x480@60, SVGA 800x600@60, XGA 1024x768@60 and UXGA 1600x1200@60. LEDs
1 to 4 indicate the current resolution.
+
Directly open OSD PiP menu
Simultaneously press hotkey and ‘I’ to call up the OSD PiP menu.
Selection of Display Mode
Quad
Mode
Press hotkey (brief double click on hotkey) followed by ‘Q’, to switch between Quad mode and Fullscreen mode.
Fullscreen
Mode
In Quad mode, press hotkey followed by ‘F’ to switch the active channel to Fullscreen mode.
PiP Function (Fullscreen) / Channel selection (Quad)
In Fullscreen mode, press hotkey followed by ‘P’ to enable or disable the picture in picture (PiP) function.
In Quad mode, hotkey and ‘P’ opens the selector. Press hotkey and ‘P’ again to switch the active channel
(keyboard and mouse) from channel to channel as indicated by the selector.
You can also use hotkey and the arrow keys
to switch the active channel.
KEYBOARD COMMANDS - Multiple Hotkey Commands
13
KEYBOARD COMMANDS - Double Click Hotkey Commands
HK
HK
HK
HK
I
HK
V
HK
O
Q
F
P